By: Stelios
This project is really interesting, could you give more technical details about the implementation? Thank you
View ArticleBy: alex
Sure I can elaborate if you can tell me which part do you want more detail on The sensors, the arduino sketch, the COSM interface? It would take a long time to write in detail about all of it (which is...
View ArticleBy: stelios
To be honest, I don’t get two things: 1. If you follow this tutorial: http://learn.adafruit.com/send-raspberry-pi-data-to-cosm/overview, how you connect the second thermometer (and the ldr sensors)? I...
View ArticleBy: alex
Good questions. Fortunately they both have fairly straightforward answers. 1. I wrote a second blog with a photo of my circuit next to theirs. That shows clearly how the second sensor was attached. You...
View ArticleBy: Peter
hello, thanks for this article. May u can make a picture of your hardware setup? thanks Peter
View ArticleBy: alex
I’ll see if I’ve got one. I took that setup apart and put it on a breadboard for now, so I could use the Gertboard for other things. Failing that, the hardware setup is quite similar to the next blog...
View ArticleBy: How to set up a Barometric pressure sensor BMP085 on Raspberry Pi with...
[...] From previous blog posts, you’ll know I have a Raspberry Pi set up to read two temperature sensors and two light sensors (inside and outside) and log the data online at COSM Setting up...
View ArticleBy: ybone
Hi, i really like your tutorial, but i have one question: Which ports did you use to connect the sensor to your gertboard? Thanks
View ArticleBy: ybone
i am sorry…but could you explain how you installed the sensors on the gertboard, because i am not very experienced with the hardware
View ArticleBy: alex
I got most of my information from the adafruit tutorial http://learn.adafruit.com/tmp36-temperature-sensor/using-a-temp-sensor but I modified their arduino sketch to suit the pi. I’ll see if i can find...
View ArticleBy: MK
Would you mind sharing your code for this? I’m curious as to how to you’re reading the serial data from ATMega and matching the data vs my code (I’m new at this! Also, how did you get COSM to display...
View ArticleBy: alex
I’ll see if I can dig out that code and match the relevant snippets (I’m not posting it all). I’ve long-since dismantled that project and superseded it with a proto-plate version, so the Gertboard...
View ArticleBy: MK
I really appreciate you posting the above. The COSM information was incredibly useful. Thanks again and keep up the posting. Your site is excellent!
View ArticleBy: Stelios
This project is really interesting, could you give more technical details about the implementation? Thank you
View ArticleBy: alex
Sure I can elaborate if you can tell me which part do you want more detail on :) The sensors, the arduino sketch, the COSM interface? It would take a long time to write in detail about all of it (which...
View ArticleBy: stelios
To be honest, I don’t get two things: 1. If you follow this tutorial: http://learn.adafruit.com/send-raspberry-pi-data-to-cosm/overview, how you connect the second thermometer (and the ldr sensors)? I...
View ArticleBy: alex
Good questions. Fortunately they both have fairly straightforward answers. 1. I wrote a second blog with a photo of my circuit next to theirs. That shows clearly how the second sensor was attached. You...
View ArticleBy: Peter
hello, thanks for this article. May u can make a picture of your hardware setup? thanks Peter
View Article
More Pages to Explore .....